Take a 2 foot long piece of 1/4 inch wall, six inch diameter PVC sewer pipe saved from what was left on my lawn by the road crew when they re-did the sewers mains 6 years ago.
Run it through the table saw and take about an inch and a half out of it lengthwise.
Set in on the cross cut slide and make two cuts five inches long, perpendicular to the original lengthwise split, twelve inches up from one end.
Using the plumber's torch heat up the remaining area at the last cut to soften it and force the thing in to a 20 degree or so bend. Drill and bolt corners to hold bend. Some additional heat was needed to bend the corners and make it all fit. Caution burning PVC gives of some nasty and likely poisonous fumes.
Drill and fit to snow-blower.
Try and cut though four foot tall frozen snow bank left by plow truck across you driveway.
Reward yourself with home made chicken and cilantro sauce pizza.